Smart Water Bottle System

AI Hydration Monitoring, Ultra-Low Power, Modular Design

Production Ready Solution

Core Concept

"Beyond logging – promoting health through seamless interaction."

Market Needs & Core Pain Points

Insufficient hydration

Common among modern individuals, affecting metabolism, skin, and energy levels throughout the day.

Poor drinking habits

Forgetting to drink, drinking too much at once, irregular timing disrupts hydration balance.

Water quality concerns

Safety and temperature doubts, especially for infants and health-conscious users.

Personalized needs

Varying requirements in water volume, temperature, and additives for different user profiles.

Cumbersome experience

Current smart bottles rely heavily on phones, have intrusive alerts, and are hard to clean.

Data silos

Drinking data not integrated with health data (exercise, sleep, etc.) limiting insights.

Key Component Selection

Carefully selected components for optimal performance and reliability

Module	Component	Model/Spec	Key Parameters	Selection Reason
MCU	BLE SoC	Nordic nRF52840/5340	Cortex-M4F, BLE5.1, 1MB Flash	Ultra-low power, integrated BLE, Edge AI
Hydration	Flow Sensor	Sensirion SLF3x-1000B	±5% accuracy, IP68, bio-compatible	Compact size, food-grade, low power
Hydration	6-axis IMU	ST LSM6DSOX	Accel+Gyro, built-in MLC	Local action detection, lightens MCU load
Temperature	NTC Thermistor	Vishay NTCLE100E3103JB0	±0.5% accuracy	Fast response, low cost
Display	E-Ink Screen	Spectra 3000 (1.54")	Tricolor display, ultra-low power	Sunlight-readable, near-zero static power
Water Quality	TDS Sensor	CQRSEN-TDS-01	0-1000ppm, ±3%, temp compensation	Cost-effective UART sensor
Alerts	RGB LED Ring	WS2812B-2020	Serial-controlled, colorful breathing	Mini size, visual indicator
Alerts	Vibration Motor	Type 1020	3x10mm, 1.5-3V, soft feedback	Ultra-thin, provides haptic feedback

System Architecture

1. Sensing & Data Collection

Flow sensor → UART → MCU
IMU ↔ FSM algorithm → I²C → MCU
NTC thermistors → ADC (multiple points) → MCU
TDS sensor → UART → MCU

2. Power System

Wireless charging → WR-111346-01

↓

BQ25611D → 3.7V Battery

↓

TPS62743 → System 3.3V

3. Ultra-Low Power Design

MCU sleep mode 2μA
Sensors standby <10μA
IMU interrupt triggers → wake MCU and flow sensor

Design Highlights

01

Accurate Hydration Tracking

IMU + Flow Sensor + AI algorithm detects "lift-drink-sip" patterns precisely.

AI-Powered Detection

02

Modular Sensor Design

Magnetic Pogo Pin connectors for detachable, cleanable sensor module.

Easy Maintenance

03

Power Optimization

Event-driven wake-up, low-leakage circuits → standby up to 5 years.

5-Year Standby

04

Thermal Interference Mitigation

Advanced algorithm compensates for ambient temperature effects

def get_core_temp():
    t1 = read_ntc_bottom()
    t2 = read_ntc_wall()
    ambient = read_shtc3()
    return t1 + k*(t1 - t2)*(t1 - ambient)

05

Offline Voice Interaction

Supports on-device commands and alerts without internet connection.

Risk Assessment & Countermeasures

Risk Factor	Countermeasure
Flow Sensor Clog	Use self-cleaning SLF3x + app alerts + software calibration
Wireless Overheat	Avoid coil under metal + thermistor limits temp >45°C
TDS Aging	Modular TDS for replacement + calibration prompt every 6 months

Prototype Development Roadmap

Stage 1

Core Function Verification

MCU + Flow + IMU + Temp sensors integration and validation

Stage 2

Power Profiling & Optimization

Nordic Profiler Kit + IMU tuning for ultra-low power consumption

Stage 3

Structural Prototype

3D-printed modular cap + comprehensive leak testing

Stage 4

Pre-certification

FDA/LFGB soak test, IP67 immersion test for market readiness

Technical Advantages Summary

Accuracy

AI + flow sensor double assurance for precise tracking

Seamlessness

E-Ink display, breathing LEDs, soft vibration alerts

Efficiency

Event-based architecture with deep sleep modes

Modularity

Removable, easy-clean design for maintenance

This solution is production-ready, with a schematic architecture suitable for PCB design and health tech applications.

GigaDevice Semiconductor (HK) Limited

Categories

Memory

Products by GigaDevice Semiconductor (HK) Limited